Modules | Directives | FAQ | Glossary | Sitemap

Apache HTTP Server Version 2.2

<-
Apache > HTTP Server > Documentation > Version 2.2 > Modules

Apache Module mod_headers

Available Languages:  en  |  ja  |  ko 

Description:Customization of HTTP request and response headers
Status:Extension
Module Identifier:headers_module
Source File:mod_headers.c

Summary

This module provides directives to control and modify HTTP request and response headers. Headers can be merged, replaced or removed.

Directives

Topics

top

Order of Processing

The directives provided by mod_headers can occur almost anywhere within the server configuration, and can be limited in scope by enclosing them in configuration sections.

Order of processing is important and is affected both by the order in the configuration file and by placement in configuration sections. These two directives have a different effect if reversed:

RequestHeader append MirrorID "mirror 12"
RequestHeader unset MirrorID

This way round, the MirrorID header is not set. If reversed, the MirrorID header is set to "mirror 12".

top

Early and Late Processing

mod_headers can be applied either early or late in the request. The normal mode is late, when Request Headers are set immediately before running the content generator and Response Headers just as the response is sent down the wire. Always use Late mode in an operational server.

Early mode is designed as a test/debugging aid for developers. Directives defined using the early keyword are set right at the beginning of processing the request. This means they can be used to simulate different requests and set up test cases, but it also means that headers may be changed at any time by other modules before generating a Response.

Because early directives are processed before the request path's configuration is traversed, early headers can only be set in a main server or virtual host context. Early directives cannot depend on a request path, so they will fail in contexts such as <Directory> or <Location>.

top

Examples

  1. Copy all request headers that begin with "TS" to the response headers:

    Header echo ^TS

  2. Add a header, MyHeader, to the response including a timestamp for when the request was received and how long it took to begin serving the request. This header can be used by the client to intuit load on the server or in isolating bottlenecks between the client and the server.

    Header set MyHeader "%D %t"

    results in this header being added to the response:

    MyHeader: D=3775428 t=991424704447256

  3. Say hello to Joe

    Header set MyHeader "Hello Joe. It took %D microseconds \
    for Apache to serve this request."

    results in this header being added to the response:

    MyHeader: Hello Joe. It took D=3775428 microseconds for Apache to serve this request.

  4. Conditionally send MyHeader on the response if and only if header MyRequestHeader is present on the request. This is useful for constructing headers in response to some client stimulus. Note that this example requires the services of the mod_setenvif module.

    SetEnvIf MyRequestHeader myvalue HAVE_MyRequestHeader
    Header set MyHeader "%D %t mytext" env=HAVE_MyRequestHeader

    If the header MyRequestHeader: myvalue is present on the HTTP request, the response will contain the following header:

    MyHeader: D=3775428 t=991424704447256 mytext

  5. Enable DAV to work with Apache running HTTP through SSL hardware (problem description) by replacing https: with http: in the Destination header:

    RequestHeader edit Destination ^https: http: early

  6. Set the same header value under multiple non-exclusive conditions, but do not duplicate the value in the final header. If all of the following conditions applied to a request (i.e., if the CGI, NO_CACHE and NO_STORE environment variables all existed for the request):

    Header merge Cache-Control no-cache env=CGI
    Header merge Cache-Control no-cache env=NO_CACHE
    Header merge Cache-Control no-store env=NO_STORE

    then the response would contain the following header:

    Cache-Control: no-cache, no-store

    If append was used instead of merge, then the response would contain the following header:

    Cache-Control: no-cache, no-cache, no-store

top

Header Directive

Description:Configure HTTP response headers
Syntax:Header [condition] set|append|merge|add|unset|echo|edit header [value] [early|env=[!]variable]
Context:server config, virtual host, directory, .htaccess
Override:FileInfo
Status:Extension
Module:mod_headers
Compatibility:The merge argument is available in version 2.2.9 and later. The edit argument is available in version 2.2.4 and later.

This directive can replace, merge or remove HTTP response headers. The header is modified just after the content handler and output filters are run, allowing outgoing headers to be modified.

The optional condition can be either onsuccess or always. It determines, which internal header table should be operated on. onsuccess stands for 2xx status codes and always for all status codes (including 2xx). Especially if you want to unset headers set by certain modules, you should try out, which table is affected.

The action it performs is determined by the second argument. This can be one of the following values:

set
The response header is set, replacing any previous header with this name. The value may be a format string.
append
The response header is appended to any existing header of the same name. When a new value is merged onto an existing header it is separated from the existing header with a comma. This is the HTTP standard way of giving a header multiple values.
merge
The response header is appended to any existing header of the same name, unless the value to be appended already appears in the header's comma-delimited list of values. When a new value is merged onto an existing header it is separated from the existing header with a comma. This is the HTTP standard way of giving a header multiple values. Values are compared in a case sensitive manner, and after all format specifiers have been processed. Values in double quotes are considered different from otherwise identical unquoted values. Available in version 2.2.9 and later.
add
The response header is added to the existing set of headers, even if this header already exists. This can result in two (or more) headers having the same name. This can lead to unforeseen consequences, and in general set, append or merge should be used instead.
unset
The response header of this name is removed, if it exists. If there are multiple headers of the same name, all will be removed. value must be omitted.
echo
Request headers with this name are echoed back in the response headers. header may be a regular expression. value must be omitted.
edit
If this request header exists, its value is transformed according to a regular expression search-and-replace. The value argument is a regular expression, and the replacement is a replacement string, which may contain backreferences. Available in version 2.2.4 and later.

This argument is followed by a header name, which can include the final colon, but it is not required. Case is ignored for set, append, merge, add, unset and edit. The header name for echo is case sensitive and may be a regular expression.

For set, append, merge and add a value is specified as the third argument. If value contains spaces, it should be surrounded by double quotes. value may be a character string, a string containing format specifiers or a combination of both. The following format specifiers are supported in value:

FormatDescription
%% The percent sign
%t The time the request was received in Universal Coordinated Time since the epoch (Jan. 1, 1970) measured in microseconds. The value is preceded by t=.
%D The time from when the request was received to the time the headers are sent on the wire. This is a measure of the duration of the request. The value is preceded by D=. The value is measured in microseconds.
%{FOOBAR}e The contents of the environment variable FOOBAR.
%{FOOBAR}s The contents of the SSL environment variable FOOBAR, if mod_ssl is enabled.

Note

The %s format specifier is only available in Apache 2.1 and later; it can be used instead of %e to avoid the overhead of enabling SSLOptions +StdEnvVars. If SSLOptions +StdEnvVars must be enabled anyway for some other reason, %e will be more efficient than %s.

For edit there is both a value argument which is a regular expression, and an additional replacement string.

The Header directive may be followed by an an additional argument, which may be used to specify conditions under which the action will be taken, or may be the keyword early to specify early processing. If the environment variable specified in the env=... argument exists (or if the environment variable does not exist and env=!... is specified) then the action specified by the Header directive will take effect. Otherwise, the directive will have no effect on the request.

Except in early mode, the Header directives are processed just before the response is sent to the network. These means that it is possible to set and/or override most headers, except for those headers added by the header filter.

top

RequestHeader Directive

Description:Configure HTTP request headers
Syntax:RequestHeader set|append|merge|add|unset|edit header [value] [replacement] [early|env=[!]variable]
Context:server config, virtual host, directory, .htaccess
Override:FileInfo
Status:Extension
Module:mod_headers
Compatibility:The merge argument is available in version 2.2.9 and later. The edit argument is available in version 2.2.4 and later.

This directive can replace, merge, change or remove HTTP request headers. The header is modified just before the content handler is run, allowing incoming headers to be modified. The action it performs is determined by the first argument. This can be one of the following values:

set
The request header is set, replacing any previous header with this name
append
The request header is appended to any existing header of the same name. When a new value is merged onto an existing header it is separated from the existing header with a comma. This is the HTTP standard way of giving a header multiple values.
merge
The response header is appended to any existing header of the same name, unless the value to be appended already appears in the existing header's comma-delimited list of values. When a new value is merged onto an existing header it is separated from the existing header with a comma. This is the HTTP standard way of giving a header multiple values. Values are compared in a case sensitive manner, and after all format specifiers have been processed. Values in double quotes are considered different from otherwise identical unquoted values. Available in version 2.2.9 and later.
add
The request header is added to the existing set of headers, even if this header already exists. This can result in two (or more) headers having the same name. This can lead to unforeseen consequences, and in general set, append or merge should be used instead.
unset
The request header of this name is removed, if it exists. If there are multiple headers of the same name, all will be removed. value must be omitted.
edit
If this request header exists, its value is transformed according to a regular expression search-and-replace. The value argument is a regular expression, and the replacement is a replacement string, which may contain backreferences. Available in version 2.2.4 and later.

This argument is followed by a header name, which can include the final colon, but it is not required. Case is ignored. For set, append, merge and add a value is given as the third argument. If a value contains spaces, it should be surrounded by double quotes. For unset, no value should be given. value may be a character string, a string containing format specifiers or a combination of both. The supported format specifiers are the same as for the Header, please have a look there for details. For edit both a value and a replacement are required, and are a regular expression and a replacement string respectively.

The RequestHeader directive may be followed by an additional argument, which may be used to specify conditions under which the action will be taken, or may be the keyword early to specify early processing. If the environment variable specified in the env=... argument exists (or if the environment variable does not exist and env=!... is specified) then the action specified by the RequestHeader directive will take effect. Otherwise, the directive will have no effect on the request.

Except in early mode, the RequestHeader directive is processed just before the request is run by its handler in the fixup phase. This should allow headers generated by the browser, or by Apache input filters to be overridden or modified.

Available Languages:  en  |  ja  |  ko